Visiting Sector 2
Plot 2135, Sector 2, Free Hold, Bahadurgarh, Haryana 124507. Call RTS before a visit to confirm who will receive the equipment and whether this address is suitable for your handover.
A site visit or a certificate query
For an instrument that must stay on a machine, tell us where it is fitted, when the line can stop and who will arrange access. Include the unit of measurement and the points used in production.
If you are following up on earlier work, quote the certificate number, date and instrument serial number. RTS Calibration is a unit of Technex Calibration (OPC) Private Limited. The laboratory documents section publishes certificate CC-4643 in that company name, valid from 09 January 2026 to 08 January 2030. For a new order, confirm the issuing facility and the scope applicable to the measurements you need.
Assembly tools from Jhajjar Model Economic Township
For a MET City works in the Dadri Toe area of Jhajjar, use the tenant name, plant entrance and plot on the gate pass. A tool may be issued at an assembly station and collected later at central stores. If the crew uses a wrench for several bolt sizes, copy the torque settings from the station sheet along with the unit and direction. For a dial indicator on a handling-equipment fixture, list the travel used and which tip will come with it.
Tell us whether the instruments will come through the RTS contact in Bahadurgarh or whether you need work assessed at the tenant plant. Agree the handover with RTS before dispatch. If a subcontractor looks after the fixture, include the name of the person who can release the indicator and accept it back.
Tools from the Sector 17 Footwear Park
A footwear sample room may use a caliper on a sole and a balance for weighing materials. Give the thickness range or sample weight used for each check. If production needs one tool while the other is away, say which can leave first.
For a visit to the Footwear Park, give the Sector 17 plot and the entrance marked on the visitor pass. Use the Sector 2 contact above to discuss a handover. If samples are also measured at an IMT Rohtak facility, list the tools held there separately so both teams receive the right records.