Torque settings and gauges used for part acceptance
Copy the setting from the assembly instruction, including its unit and direction of use. If the operator uses an interchangeable head, identify the head supplied with the wrench. For plain plug or ring gauges, copy the size and markings from both members of the set and identify the drawing or tolerance your inspector uses.
Separate the Rajasthan and Haryana handovers
For a Bhiwadi-area unit, use the estate shown on the gate pass, such as Tapukara or Khushkhera. For a Neemrana unit in the Japanese Zone, include the plot and stores hours. Give each works its own release date. RTS can then discuss whether the tools can travel together or need separate collections.
If the same order includes a supplier at IMT Bawal in Haryana, put its tools on a separate list and identify the person authorised to accept them there.
When a customer supplies the inspection gauge
Check the customer's instructions before sending a loaned gauge away. The tool may carry the customer's identification as well as the supplier's stores number. List both and identify who can approve an adjustment, repair assessment or change in the requested measurement points. A damaged marking should be described in the enquiry rather than replaced without the owner's agreement.
Where an audit requires a result against a particular tolerance, include that tolerance and its reference. Keep GO and NO-GO members distinguishable in the packing list. On return, reconcile the individual members against the certificate and the dispatch record before the set goes back to the component inspector.